News
>
>
Higher craftsmanship and better performance! HK32C0 brings better choices
Check category

Higher craftsmanship and better performance! HK32C0 brings better choices

  • Categories:News
  • Author:
  • Origin:
  • 2023.06.30

(Summary description) The development of smart home appliances not only meets basic functional requirements, but also requires intelligent control, energy conservation and emission reduction, and remote control through apps. The market has higher requirements for the performance and process of MCU, and the high-performance HK32C030 series based on 32-bit kernel provides a good choice for the above requirements. In 2023, Hangshun Chip will launch a new mainstream MCU HK32C030 family, which not only has reliable performance, but also has good software and hardware compatibility with the HK32F030 family. It is a new upgraded version of the mainstream HK32F030 series, with a main frequency of 64MHz, 64 KB Flash, and 10 KB SRAM. The HK32C030 family supports DMA function, division and square root calculation, integrates hardware division and square root operation units, can improve software processing ability, and respond to external events faster. The HK32C030 family is based on a higher level of craftsmanship and rich production experience to ensure stable product performance, safety, and reliability, allowing users to have a better user experience. At the same time, it also provides customers with more high-quality choices when choosing. The HK32C030 family integrates richer peripheral resources and has a wider range of applications, covering various smart home appliances such as air conditioners, refrigerators, washing machines, range hoods, coffee machines, etc. In addition, it can also be used in various fields such as smart locks, smart homes, personal care products, portable power supplies, motor control, smartwatches, LED control and dimming, industrial ranging, in car multimedia, medical handheld devices, etc. The HK32C030 family of chips has been supplied in bulk and has been prioritized by manufacturers. Customers and agents are welcome to place orders. Product packaging     The HK32C030 family offers multiple mainstream packaging forms 3x3mm 20pin QFN, 4x4mm 20/28/32pin QFN: Micro package, space saving SOP8, TSSOP20, LQFP32/48: Common Packaging Product features HK32C030 using ARM ®  Cortex ®- M0 core, with a maximum operating frequency of 64MHz, built-in up to 64 Kbyte Flash. By configuring the Flash control register, the remapping of interrupt vectors within the main Flash area can be achieved. HK32C030 supports traditional Flash Level 0/1/2 read-write protection. To meet various security applications, HK32C030 provides CRC to verify the correctness and integrity of data transmission or storage.   ➢Operating voltage range  ●Main power supply VDD:2.4 V ~ 5.5 V ➢Working temperature range:-40℃ ~ +105℃ ➢Typical operating current  ●Run mode:1.46mA@8MHz;7.31mA@64MHz  ●Sleep mode:1.05mA@8MHz;671μA@32kHz  ●Stop mode: - LDO Full speed:128μA@3.3V - LDO low power consumption:2.8μA@3.3V ➢storage  ●64 Kbyte Flash(Including 61Kbyte main Flash area and 3Kbyte Bootloader area that can be configured as the main Flash area) - When the CPU frequency is not higher than 24 MHz, it supports 0 waiting bus cycles to access Flash - Flash has data security protection function, which can be set for read protection and write protection respectively.  ●10 Kbyte SRAM ➢clock  ●External high-speed clock(HSE):support 4 ~ 32 MHz  ●External low-speed clock(LSE):32.768 kHz  ●On chip high-speed clock(HSI):8 MHz/16 MHz/64 MHz  ●On chip low-speed clock(LSI):40 kHz  ●PLL clock:64MHz(max)  ●GPIO External input clock:32 MHz(max) ➢reset  ●External pin reset  ●Option Byte Loader Reset  ●Watchdog (IWDG and WWDG) counter reset  ●Power on/off reset (POR/PDR)  ●Software reset  ●Low power management reset ➢Programmable Voltage Monitor (PVD)  ●Level 8 detection voltage threshold adjustable  ●Configurable detection of rising and falling edges ➢GPIO port  ●Supports up to 40 GPIO pins  ●Each GPIO pin can be configured as an external interrupt input  ●Provide up to 40 mA driving current ➢Data communication interface  ●3-way UART: It can generate different baud rates through its built-in baud rate generator, and also supports single line half duplex communication, multi processor communication, and other functions.  ●2-way high-speed SPI: supports 4 to 16 bit programmable data frames with multiplexed I2S interface。  ●2-way I2C: Supports ultra fast mode (1 Mbit/s), SMBus, and PMbus. In Stop mode, supports data reception and wake-up. ➢Timer and PWM generator  ●1 16 bit advanced timer (TIM1 has 4 PWM outputs, including 3 with dead zone complementary outputs and braking function)  ●5 16 bit and 1 32-bit universal timers (TIM2/TIM3/TIM14/TIM15/TIM16/TIM17)  ●1 16 bit basic timer (TIM6)  ➢DMA controller (with 5 channels)  ●Supports triggering of various peripherals such as timers, ADC, SPI (I2S), I2C, UART, etc. ➢Fixed point division/root operation unit  ●Supports 32-bit fixed-point division, which can obtain both quotient and remainder simultaneously  ●Supports 32-bit fixed-point high-precision square ro

Higher craftsmanship and better performance! HK32C0 brings better choices

(Summary description)


The development of smart home appliances not only meets basic functional requirements, but also requires intelligent control, energy conservation and emission reduction, and remote control through apps. The market has higher requirements for the performance and process of MCU, and the high-performance HK32C030 series based on 32-bit kernel provides a good choice for the above requirements.







In 2023, Hangshun Chip will launch a new mainstream MCU HK32C030 family, which not only has reliable performance, but also has good software and hardware compatibility with the HK32F030 family. It is a new upgraded version of the mainstream HK32F030 series, with a main frequency of 64MHz, 64 KB Flash, and 10 KB SRAM. The HK32C030 family supports DMA function, division and square root calculation, integrates hardware division and square root operation units, can improve software processing ability, and respond to external events faster. The HK32C030 family is based on a higher level of craftsmanship and rich production experience to ensure stable product performance, safety, and reliability, allowing users to have a better user experience. At the same time, it also provides customers with more high-quality choices when choosing.

The HK32C030 family integrates richer peripheral resources and has a wider range of applications, covering various smart home appliances such as air conditioners, refrigerators, washing machines, range hoods, coffee machines, etc. In addition, it can also be used in various fields such as smart locks, smart homes, personal care products, portable power supplies, motor control, smartwatches, LED control and dimming, industrial ranging, in car multimedia, medical handheld devices, etc. The HK32C030 family of chips has been supplied in bulk and has been prioritized by manufacturers. Customers and agents are welcome to place orders.
Product packaging





 




 

The HK32C030 family offers multiple mainstream packaging forms


3x3mm 20pin QFN, 4x4mm 20/28/32pin QFN: Micro package, space saving
SOP8, TSSOP20, LQFP32/48: Common Packaging


Product features

HK32C030 using ARM ®  Cortex ®- M0 core, with a maximum operating frequency of 64MHz, built-in up to 64 Kbyte Flash. By configuring the Flash control register, the remapping of interrupt vectors within the main Flash area can be achieved. HK32C030 supports traditional Flash Level 0/1/2 read-write protection. To meet various security applications, HK32C030 provides CRC to verify the correctness and integrity of data transmission or storage.

 

➢Operating voltage range

 ●Main power supply VDD:2.4 V ~ 5.5 V

➢Working temperature range:-40℃ ~ +105℃

➢Typical operating current

 ●Run mode:1.46mA@8MHz;7.31mA@64MHz

 ●Sleep mode:1.05mA@8MHz;671μA@32kHz

 ●Stop mode:

- LDO Full speed:128μA@3.3V

- LDO low power consumption:2.8μA@3.3V

➢storage

 ●64 Kbyte Flash(Including 61Kbyte main Flash area and 3Kbyte Bootloader area that can be configured as the main Flash area)

- When the CPU frequency is not higher than 24 MHz, it supports 0 waiting bus cycles to access Flash

- Flash has data security protection function, which can be set for read protection and write protection respectively.

 ●10 Kbyte SRAM

➢clock

 ●External high-speed clock(HSE):support 4 ~ 32 MHz

 ●External low-speed clock(LSE):32.768 kHz

 ●On chip high-speed clock(HSI):8 MHz/16 MHz/64 MHz

 ●On chip low-speed clock(LSI):40 kHz

 ●PLL clock:64MHz(max)

 ●GPIO External input clock:32 MHz(max)

➢reset

 ●External pin reset

 ●Option Byte Loader Reset

 ●Watchdog (IWDG and WWDG) counter reset

 ●Power on/off reset (POR/PDR)

 ●Software reset

 ●Low power management reset

➢Programmable Voltage Monitor (PVD)

 ●Level 8 detection voltage threshold adjustable

 ●Configurable detection of rising and falling edges

➢GPIO port

 ●Supports up to 40 GPIO pins

 ●Each GPIO pin can be configured as an external interrupt input

 ●Provide up to 40 mA driving current

➢Data communication interface

 ●3-way UART: It can generate different baud rates through its built-in baud rate generator, and also supports single line half duplex communication, multi processor communication, and other functions.

 ●2-way high-speed SPI: supports 4 to 16 bit programmable data frames with multiplexed I2S interface。

 ●2-way I2C: Supports ultra fast mode (1 Mbit/s), SMBus, and PMbus. In Stop mode, supports data reception and wake-up.

➢Timer and PWM generator

 ●1 16 bit advanced timer (TIM1 has 4 PWM outputs, including 3 with dead zone complementary outputs and braking function)

 ●5 16 bit and 1 32-bit universal timers (TIM2/TIM3/TIM14/TIM15/TIM16/TIM17)

 ●1 16 bit basic timer (TIM6) 

➢DMA controller (with 5 channels)

 ●Supports triggering of various peripherals such as timers, ADC, SPI (I2S), I2C, UART, etc.

➢Fixed point division/root operation unit

 ●Supports 32-bit fixed-point division, which can obtain both quotient and remainder simultaneously

 ●Supports 32-bit fixed-point high-precision square ro

  • 2023-06-30
Information

The development of smart home appliances not only meets basic functional requirements, but also requires intelligent control, energy conservation and emission reduction, and remote control through apps. The market has higher requirements for the performance and process of MCU, and the high-performance HK32C030 series based on 32-bit kernel provides a good choice for the above requirements.

In 2023, Hangshun Chip will launch a new mainstream MCU HK32C030 family, which not only has reliable performance, but also has good software and hardware compatibility with the HK32F030 family. It is a new upgraded version of the mainstream HK32F030 series, with a main frequency of 64MHz, 64 KB Flash, and 10 KB SRAM. The HK32C030 family supports DMA function, division and square root calculation, integrates hardware division and square root operation units, can improve software processing ability, and respond to external events faster. The HK32C030 family is based on a higher level of craftsmanship and rich production experience to ensure stable product performance, safety, and reliability, allowing users to have a better user experience. At the same time, it also provides customers with more high-quality choices when choosing.

The HK32C030 family integrates richer peripheral resources and has a wider range of applications, covering various smart home appliances such as air conditioners, refrigerators, washing machines, range hoods, coffee machines, etc. In addition, it can also be used in various fields such as smart locks, smart homes, personal care products, portable power supplies, motor control, smartwatches, LED control and dimming, industrial ranging, in car multimedia, medical handheld devices, etc. The HK32C030 family of chips has been supplied in bulk and has been prioritized by manufacturers. Customers and agents are welcome to place orders.
Product packaging

 

 

The HK32C030 family offers multiple mainstream packaging forms

  • 3x3mm 20pin QFN, 4x4mm 20/28/32pin QFN: Micro package, space saving
  • SOP8, TSSOP20, LQFP32/48: Common Packaging

Product features

HK32C030 using ARM ®  Cortex ®- M0 core, with a maximum operating frequency of 64MHz, built-in up to 64 Kbyte Flash. By configuring the Flash control register, the remapping of interrupt vectors within the main Flash area can be achieved. HK32C030 supports traditional Flash Level 0/1/2 read-write protection. To meet various security applications, HK32C030 provides CRC to verify the correctness and integrity of data transmission or storage.

 

➢Operating voltage range

 ●Main power supply VDD:2.4 V ~ 5.5 V
➢Working temperature range:-40℃ ~ +105℃
➢Typical operating current
 ●Run mode:1.46mA@8MHz;7.31mA@64MHz
 ●Sleep mode:1.05mA@8MHz;671μA@32kHz
 ●Stop mode:
- LDO Full speed:128μA@3.3V
- LDO low power consumption:2.8μA@3.3V
➢storage
 ●64 Kbyte Flash(Including 61Kbyte main Flash area and 3Kbyte Bootloader area that can be configured as the main Flash area)
- When the CPU frequency is not higher than 24 MHz, it supports 0 waiting bus cycles to access Flash
- Flash has data security protection function, which can be set for read protection and write protection respectively.
 ●10 Kbyte SRAM
➢clock
 ●External high-speed clock(HSE):support 4 ~ 32 MHz
 ●External low-speed clock(LSE):32.768 kHz
 ●On chip high-speed clock(HSI):8 MHz/16 MHz/64 MHz
 ●On chip low-speed clock(LSI):40 kHz
 ●PLL clock:64MHz(max)
 ●GPIO External input clock:32 MHz(max)
➢reset
 ●External pin reset
 ●Option Byte Loader Reset
 ●Watchdog (IWDG and WWDG) counter reset
 ●Power on/off reset (POR/PDR)
 ●Software reset
 ●Low power management reset
➢Programmable Voltage Monitor (PVD)
 ●Level 8 detection voltage threshold adjustable
 ●Configurable detection of rising and falling edges
➢GPIO port
 ●Supports up to 40 GPIO pins
 ●Each GPIO pin can be configured as an external interrupt input
 ●Provide up to 40 mA driving current
➢Data communication interface
 ●3-way UART: It can generate different baud rates through its built-in baud rate generator, and also supports single line half duplex communication, multi processor communication, and other functions.
 ●2-way high-speed SPI: supports 4 to 16 bit programmable data frames with multiplexed I2S interface。
 ●2-way I2C: Supports ultra fast mode (1 Mbit/s), SMBus, and PMbus. In Stop mode, supports data reception and wake-up.
➢Timer and PWM generator
 ●1 16 bit advanced timer (TIM1 has 4 PWM outputs, including 3 with dead zone complementary outputs and braking function)
 ●5 16 bit and 1 32-bit universal timers (TIM2/TIM3/TIM14/TIM15/TIM16/TIM17)
 ●1 16 bit basic timer (TIM6) 
➢DMA controller (with 5 channels)
 ●Supports triggering of various peripherals such as timers, ADC, SPI (I2S), I2C, UART, etc.
➢Fixed point division/root operation unit
 ●Supports 32-bit fixed-point division, which can obtain both quotient and remainder simultaneously
 ●Supports 32-bit fixed-point high-precision square root
➢On chip analog circuit
 ●1 12 bit SAR ADC (up to 23 analog signal input channels)
- Maximum converter frequency: 1.14 MSPS
- Supports automatic continuous conversion and scanning conversion functions
 ●Internal reference voltage
➢temperature sensor
 ●9-bit resolution temperature sensor with a temperature acquisition range of -40 ℃ to+105 ℃
➢Calendar RTC
 ●With alarm function
➢data security
 ●CRC verification hardware unit
➢96 bit chip UID identification
➢CPU tracking and debugging
 ●SWD debugging interface
 ●ARM ®  CoreSightTM debugging components (ROM-Table, DWT, and BPU)
 ●Customized DBGMCU debugging controller (low-power mode simulation control, debugging peripheral clock control, debugging and tracking interface allocation)
➢reliability

 ●Passed the HBM6500V/CDM2000V/LU800mA level test.

返回列表
A solution for automotive gear shift switch based on Hangshun chip automotive grade MCU HK32A040C8T3
2024.04.07
A solution for automotive gear shift switch based on Hangshun chip automotive grade MCU HK32A040C8T3
Throughout the global development of passenger cars, automatic transmission has been widely adopted. Its simple and easy to learn, convenient and intelligent characteristics bring drivers a more comfortable driving experience, and also better adapt to urban traffic. The implementation of the automatic shift function actually uses a gear shift switch instead of manual operation. The gear shift switch will control the shift fork and gear shift based on different engine speeds, vehicle speeds, and the driver's intention to press the accelerator. To achieve these automated operations, a shift switch requires a brain. The Hangshun chip M0 series automotive grade MCU HK32A040C8T3 is such a "brain", applied in gear shift switch schemes. Its main function is to receive signals from the gear shift switch and convert these signals into electrical signals that can control the car's engine, transmission, and other parts, thereby simplifying driving operations and providing great convenience for the driver. In the process of developing its new generation of electric vehicles, in order to ensure that the vehicle's performance, reliability, and safety reach the optimal level, after in-depth technical evaluation and multiple rounds of screening, Selis New Energy Vehicles finally chose a gear shift switch scheme based on the Hangshun chip HK32A040C8T3. The Selis engineering team has conducted a rigorous review of the functional characteristics, processing speed, power consumption performance, environmental adaptability, and cost-effectiveness of the Hangshun HK32A040C8T3 MCU in multiple dimensions. Hangshun's MCU has successfully conquered the engineering team with its outstanding performance, especially in high reliability and strong anti-interference ability. In addition, HK32A040C8T3 has high integration and flexible peripheral interfaces, providing engineers with greater design freedom and optimization space, making the entire electronic control system more compact and efficient. HK32A040 using ARM ®  Cortex ®- M0 core, with a maximum operating frequency of 96MHz, built-in up to 124 Kbyte Flash and 10 Kbyte SRAM. By configuring the Flash controller registers, the remapping of interrupt vectors within the main Flash area can be achieved. And it supports traditional Flash Level 0/1/2 read-write protection and Flash code encryption (patented by Hangshun). Strong scalability 32-bit ARM CPU architecture, good ecological environment Rich peripheral resources to meet platform expansion Multiple packaging options available for LQFP64, LQFP48, QFN32, and QFN28 high reliability Car specification quality, compliant with AEC-Q100 Grade 1 Complies with ISO 9001 and IATFT 16949 quality management systems Supports -40 ℃~125 ℃ High cost performance ratio Equal performance/resources, with higher cost-effectiveness Quality service Complete ecological supporting facilities 15 years of design life, with a supply chain guarantee of over 15 years The gear shift switch scheme based on the Hangshun Vehicle Class MCU HK32A040C8T3 has been successfully applied in the Sailis new energy vehicle, which not only improves the electronic control efficiency of the entire vehicle, but also achieves lower energy consumption and better user experience. The Hangshun chip series vehicle grade MCU HK32A040 can be widely used in vehicle domain controllers, such as doors and windows, tail lights, wipers, anti-theft alarms, car keys, air conditioning, electric seats, etc. Hangshun Chip adheres to the strategy of SoC+32-bit high-end MCU in automotive standards. In recent years, it has invested a large amount of research and development resources in the field of automotive electronics, committed to providing the market with higher reliability and more cost-effective automotive chip solutions, helping customers achieve a win-win situation in cost control and user experience.
More >
Hangshun chip has obtained the highest ASIL D certification in ISO 26262, and the automotive functional safety management system has been further upgraded
2023.10.10
Hangshun chip has obtained the highest ASIL D certification in ISO 26262, and the automotive functional safety management system has been further upgraded
Recently, the international independent third-party testing, inspection, and certification agency SGS has issued the ISO 26262:2018 ASIL D process certification certificate for the highest level of automotive functional safety to Shenzhen Hangshun Chip Technology Research and Development Co., Ltd. (hereinafter referred to as "Hangshun Chip"). This marks that Hangshun Chip has established a comprehensive chip product software and hardware development process management system that meets the highest level of automotive functional safety requirements. It also confirms that Hangshun Chip's automotive MCU products and services can fully meet the automotive functional safety requirements of top automotive manufacturers in the product design and integration stage, greatly reducing the workload of customer self verification and certification, and accelerating product launch. With the development of electrification and intelligence in automobiles, safety is becoming increasingly important. These new technologies have introduced more electronic control systems and sensors, thus increasing the risk of system failures. The ISO 26262 standard is currently recognized globally as the functional safety process standard for automobiles. It is aimed at automotive OEMs and their global suppliers, covering the entire product lifecycle, including functional safety management, system stage development, software and hardware stage development, supporting all aspects such as processes, safety analysis, and product release. Through the guidance and application of standardized technical specifications, the risk of automotive electrical or electronic system failures is minimized, ultimately reducing related traffic accidents. During this certification process, SGS highly recognizes that the development process and quality management system of Hangshun chips fully comply with the requirements of ISO26262:2018 standard. At the same time, through this process, Hangshun Chip further sorted out the development process of functional standards throughout the entire lifecycle, improved the management ability of the functional safety team, and comprehensively forged a vehicle specification MCU chip team with both soft and hard strength, professional skills, and management capabilities. Starting from 2021, multiple families such as Hang Shun Chip SoC HK32AUTO39A and HK32A04AA have passed the AEC-Q100 standard certification, providing cost-effective and reliable development options for various automotive scenarios such as body control, automotive lighting, entertainment systems, and in car navigation. These products have been widely used in mainstream products of multiple top automotive brands. As a leading "automotive SoC+high-end MCU" design enterprise, Hangshun Chip always adheres to the product design concept of high performance and high safety, and actively establishes a quality management system that meets international standards. At present, Hangshun chip is accelerating the development of high-end automotive MCU to meet the ASIL-D level functional security and hardware encryption network security requirements, and new products will gradually serve automotive customers. About Hangshun chips Shenzhen Hangshun Chip Technology R&D Co., Ltd. was established in 2013, with branches and offices in Chengdu and Shanghai. It is committed to the dual strategy of "vehicle standard SoC+high-end MCU supermarket, making everything more intelligent and a better smart life", and realizing the great vision of "HK32MCU as the core, creating a boundaryless ecological platform level enterprise for Hangshun". The Hangshun HK32MCU is divided into economy type, mainstream type, low energy consumption type, high-performance type, specialized type, and innovative type, and is mass-produced and applied to thousands of customers in automotive, industrial, household appliances, IoT, and other industries. A total of eight rounds of strategic financing totaling hundreds of millions of yuan have been completed, and have successively won titles such as Forbes/Hurun Global Unicorn, China IC Unicorn, National Specialized and New Key "Little Giant" Enterprise, National Key Integrated Circuit Design Enterprise, and National High tech Enterprise. About SGS Global Functional Safety Technology Center SGS is an internationally recognized inspection, appraisal, testing, and certification agency, serving as a benchmark for quality and integrity. The SGS Global Functional Safety Technology Center is an automotive functional safety training, consulting, and certification organization authorized by DaKKS in Germany. It is a functional safety partner for many well-known domestic and foreign automotive companies and component suppliers. Martin Schimt, the head of the technical center, is the initiator and drafter of ISO 26262. Currently, SGS has over 80 automotive functional safety experts and has issued over 335 ISO 26262 functional safety certification certificate
More >

推荐新闻

×

Product Center

Solution

About Us

Technical Support

Please let us know your contact details

Contact us

No. 159, North Pingji Avenue, Pinghu Street, Longgang District, Shenzhen

Heng Road E Times Hangshun Chip Headquarters Building 22nd Floor

86-0755-88917820(Shenzhen)

2880948126

Copyright © 2021 Shenzhen Hangshun Chip Technology R&D Co., Ltd.  粤ICP备13075796号-2